Full automatic crimp to crimp machines – EKSON https://www.ekson.com.tr Sun, 06 Dec 2020 19:33:42 +0000 en-US hourly 1 https://wordpress.org/?v=5.6.3 https://www.ekson.com.tr/wp-content/uploads/2020/08/ekson.logo_-68x70.png Full automatic crimp to crimp machines – EKSON https://www.ekson.com.tr 32 32 188136527 Shinmaywa Model TR500 Terminating Machine https://www.ekson.com.tr/products/full-automatic-crimp-to-crimp-machines/model-tr500-terminating-machine/ Fri, 13 Nov 2020 13:20:41 +0000 https://sosyaldizayn.com/eksonn/?post_type=product&p=2472 Model TR500 TRD510 TRD510WPA TRD510WPSA Maximum Processing capability*1 Both-ends crimping 60 mm 6,000 pieces/hour — 100 mm — 5,000 pieces/hour 500 mm 4,800 pieces/hour 4,200 pieces/hour 1,000 mm 4,200 pieces/hour 3,750 pieces/hour Seal insertion both-ends crimping 100 mm — — 3,000 pieces/hour 500 mm — — 2,700 pieces/hour 1,000 mm — — 2,500 pieces/hour Cutting length min. - max. 30 — 20,000 mm*2 50 — 20,000 mm Stripping length min. - max. 1 — 10mm 1 — 16 mm Crimping Press capability 19.6 kN (2.0 t) 19.6 kN (2.0 t) Digital crimper Applicable terminal Continuous open barrel, Side/end feed Seal Applicable seal — — Outside diameter ⌀8 mm × length 12 mm or less, circular rubber seal*3 Seal unit — — 3-module both-ends seal insertion 3-module single-end seal insertion Equipment Safety cover Openable cover Partial openable safety cover Wire chopper Extra Standard Terminal crimping monitor Extra Standard Sensor Crimping Standard (photoelectric) Standard (Terminal crimping monitor) Stripping Standard Terminal presence Standard Wire presence/Joint Standard Wire Tension overload Standard Wire slipping Standard Operation Input Touch panel Mouse & keyboard Language English/Chinese/Japanese English/Spanish/Chinese/Thai/Japanese Operator permission setting 2 levels 3 levels Wire feeding Practical typical speed of belt-feeding mechanism: 6 m/s, Max. speed: 10 m/s Driving motor AC servo motor for all axes Primary power source Three-phase 200 VAC ±10% (50/60 Hz) Max. power consumption Approx. 0.4 kWh Approx. 0.42 kWh Air supply 0.5 MPa
150 ℓ/min (ANR) 0.5 MPa
170 ℓ/min (ANR) 0.5 MPa
160 ℓ/min (ANR) Weight Approx. 600 kg Approx. 690 kg Approx. 710 kg Approx. 700 kg
  •   *1  Capability might change depending on the processing conditions and processing data.
  •   *2  A clamp for short wire may be required for both-ends crimping for 50mm (or less) wire.
  •   *3  For wire-seal combinations, please cosult with us in advance.

The post Shinmaywa Model TR500 Terminating Machine appeared first on EKSON.

]]> With industry-leading processing capability and less space requirement, the ShinMaywa TR500 series machines improve productivity and reduce processing cost

The TR500  series has achieved the top-class maximum processing capacity of 6,000 pieces/hour as the single-wire crimping system that can use any genuine applicator of respective companies (compared to our company’s products).
This machine is provided with a newly developed system consisting of “S axis and Y axis” mechanism in the feed unit.
The latest controllers and servo motors have achieved high-speed and high accuracy crimping, which has significantly increased the processing capacity.
The newly belt feed designed mechanism unit allows delicate wires to be fed at high-speed.
In addition, the feedback correction control increased the cut length accuracy and stability using an encoder.
By reducing path line wire inlets to 50% from previous equipment, the setup time has reduced significantly.
This machine achieves high-speed performance, high durability, easy maintenance and very friendly software.

The TR500  is equipped with various options using high technical capabilities.
ShinMaywa Industries proposes best suited products for the ever-developing market.

The post Shinmaywa Model TR500 Terminating Machine appeared first on EKSON.

]]> 2472